Two-Phase Fluid Flow Calculation Methodology for Porous Media at Different Prismatic Grid Types
Abstract
The article describes the two-phase fluid filtration calculation for non-mixing fluids based on the Black-oil model with an application of structured and unstructured prismatic grids. Equations solution is conducted through a fully implicit finite volume method. The described approach is tested on the SPE8 algorithm. Quantitative and quality parameters correlate with the commercial software package Rubis (Kappa Engineering).
About the Authors
O. I. Butnev
Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
Russian Federation
Sarov
Russian Federation
Sarov
V. Yu. Kuznetsov
Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
Russian Federation
Sarov
Russian Federation
Sarov
V. A. Pronin
Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
Russian Federation
Sarov
Russian Federation
Sarov
M. L. Sidorov
Russian Federal Nuclear Center, All-Russian Research Institute of Experimental Physics
Russian Federation
Sarov
Russian Federation
Sarov
R. M. Kats
System Research Institute, Russian Academy of Sciences
Russian Federation
Russian Federation
I. V. Afanaskin
System Research Institute, Russian Academy of Sciences
Russian Federation
Russian Federation
A. V. Korolev
System Research Institute, Russian Academy of Sciences
Russian Federation
Russian Federation
P. V. Yalov
System Research Institute, Russian Academy of Sciences
Russian Federation
Russian Federation
References
1. Методические указания по созданию постоянно действующих геолого-технологических моделей нефтяных и газонефтяных месторождений. Ч. 2. Фильтрационные модели. М. : ВНИИОЭНГ, 2003. 228 с.
2. Schlumberger : официал.сайт компании. URL: http://www.slb.ru/sis (дата обращения: 07.07.2018).
3. Computer Modelling Group Ltd. : официал. сайт компании. URL: http://www.cmgroup.com/software/stars.htm (дата обращения: 10.07.2018).
4. Roxar : официал. сайт компании. URL: http://www.roxar.com (дата обращения: 03.07.2018).
5. Kappa Engineering/Rubis – численное моделирование: описание. URL: https://www.kappaeng.com/software/rubis/overview (дата обращения: 11.07.2018).
6. Aziz K., Odeh A. S. Comparison of Solution to a Three-Dimensional Black-Oil Reservoir Simulation Problem // JPT. 1981. January. Vol. 33. P. 13–25.
7. Peaceman D. W. Interpretation of well-block pressure in numerical reservoir simulation // SPE Journal. 1983. Vol. 23. № 3. P. 531–543.
8. Zgangxin C., Gyamrem H., Yuanle M. Computational methods for multiphase flows in porous media. Dallas : Texas : Southern Methodist University, 2006.
9. Douglas J. Jr., Peaceman D. W., Rachford H. H. Jr. A method for calculating multi-dimensional immiscible displacement // Trans. SPE AIME. 1959. № 216. P. 297–306.
10. Davidson L. A Pressure Correction Method for Unstructured Arbitrary Control Volumes // International Journal for Numerical Methods in Fluids. 1996. Vol. 22. № 4. P. 265–281.
11. Quandalle Ph. Eighth SPE comparative solution project: Gridding Techniques in Reservoir Simulation // SPE 25263. The 12th SPE Symposium on Reservoir Simulation. New Orleans : LA, 1993.
Review
For citations:
Butnev O.I., Kuznetsov V.Yu., Pronin V.A., Sidorov M.L., Kats R.M., Afanaskin I.V., Korolev A.V., Yalov P.V. Two-Phase Fluid Flow Calculation Methodology for Porous Media at Different Prismatic Grid Types. Proceedings in Cybernetics. 2018;(3 (31)):135-152. (In Russ.)
Views:
231
Email this article 