Mathematical modeling of modernized brushless direct current motor working at maximum speed
https://doi.org/10.35266/1999-7604-2025-4-9
Abstract
The paper presents an experimental study of a modernized brushless direct current motor and develops mathematical and parameter-oriented models for calculating maximum speed based on the characteristics of the motor. The experiments on the test bed show the dependency relations of the motor revolutions to the current at each of its phases. The specified dependencies reflect the main motor settings and allow obtaining the peak current and speed values.
The testing establishes the fact that the winding coil amount has a limit. A sudden increase in the maximum
current specifies it without changes in the number of motor revolutions. A parameter-oriented model is developed by linking the conveniently measurable electrical characteristics of a modernized brushless direct current motor and a battery with the maximum speed. Also, a mathematical model of such a motor is proposed, which makes it possible to calculate the peak current and corresponding revolutions based on its parameters. The study shows the necessity of considering the influence of the chief characteristics and counter-electromotive force while working on the development of similar models, as the impact of the latter is a major at maximum speed.
About the Authors
S. N. Tkachenko
Балтийский федеральный университет имени Иммануила Канта, Калининград
Russian Federation
Russian Federation
Candidate of Sciences (Engineering), Docent
A. S. Krivoguzova
Балтийский федеральный университет имени Иммануила Канта, Калининград
Russian Federation
Russian Federation
Postgraduate
A. A. Shpilevoi
Балтийский федеральный университет имени Иммануила Канта, Калининград
Russian Federation
Russian Federation
Candidate of Sciences (Physics and Mathematics), Docent
References
1. Deepak M., Aruldavid R., Verma R. et al. A review of BLDC motor: State of art, advanced control techniques, and applications // IEEE Access. 2022. Vol. 10. P. 1–1. https://doi.org/10.1109/ACCESS.2022.3175011.
2. Kumarasamy V., Valluvan K. R., Chandrasekaran G. et al. A review of integer order PID and fractional order PID controllers using optimization techniques for speed control of brushless DC motor drive // International Journal of System Assurance Engineering and Management. 2023. Vol. 14. P. 1139–1150. https://doi.org/10.1007/s13198-023-01952-x.
3. Nisha R., Gnana Sheela K. Review of PV fed water pumping systems using BLDC Motor // Materials Today: Proceedings. 2020. Vol. 24. Pt. 3. P. 1874–1881.https://doi.org/10.1016/j.matpr.2020.03.612.
4. Andrioaia D. A., Gaitan V. G. Finding fault types of BLDC motors within UAVs using machine learning techniques // Heliyon. 2024. Vol. 10, no. 9. https://doi.org/10.1016/j.heliyon.2024.e30251.
5. Du J., Sun Y., Zhao J. et al. Loss research and thermal analysis of BLDC hollow-cup motor under reactor suppression // Applied Sciences, 2025. Vol. 15, no. 3. https://doi.org/10.3390/app15031523.
6. Machhour Z., Mrabet M. E., Mekrini Z. et al. Comparative study between DTC and FOC control strategies applied to the BLDC motor: A review // International Conference on Advanced Intelligent Systems for Sustainable Development (AI2SD’2023). Cham : Springer, 2024. Vol. 930. p. 262–271. https://doi.org/10.1007/978-3-031-54318-0_22.
7. Nguyen Q. D., Tran V. T., Pham Q. D. et al. Design brushless DC motor control by using proportional-integral strategy for a smart storage cabinet system // International Journal of Power Electronics and Drive Systems (IJPEDS). 2023. Vol. 14, no. 2. P. 708–718. https://doi.org/10.11591/ijpeds.v14.i2.pp708-718.
8. Akhtar A., Muthuramalingam T., Elsheikh A. H. et al. A review on artificial intelligence based control techniques on controlling BLDC motor measures // AIP Conference Proceedings, 2023. Vol. 2788. https://doi.org/10.1063/5.0148685.
9. Premkumar K., Manikandan B. V. Adaptive Neuro-Fuzzy Inference System based speed controller for brushless DC motor // Neurocomputing. 2014. Vol. 138. P. 260–270.
10. Carev V., Roháč J., Tkachenko S. et al. Modernization of BLDC motors for UAVs // International Review of Aerospace Engineering (IREASE), 2023. Vol. 16, no. 1. P. 29–38. https://doi.org/10.15866/irease.v16i1.23087.
11. Carev V., Roháč J., Tkachenko S. et al. The electronic switch of windings of a standard BLDC motor // Applied Sciences. 2022. Vol. 12, no. 21. P. 11096. https://doi.org/10.3390/app122111096.
12. Assoun I., Idkhajine L., Nahid-Mobarakeh B. et al. Wide-speed range sensorless control of five-phase PMSM drive under healthy and open phase fault conditions for aerospace applications // Energies. 2023. Vol. 16. P. 279. https://doi.org/10.3390/en16010279.
13. Tapre M., Karampuri R. Design and comparison of five-phase induction motors with different dimensions for heavy duty electric vehicles // 2023 IEEE 3rd International Conference on Sustainable Energy and Future Electric Transportation (SEFET). 2023. p. 1–6. https://doi.org/10.1109/SeFeT57834.2023.10245615.
14. Kurt E., Arabul A. Y., Arabul F. K. et al. A multiphase brushless direct current motor design and its implementation in medium-altitude long-endurance unmanned aerial vehicles // Applied Sciences. 2024. Vol. 14, no. 24. P. 11550–11563. https://doi.org/10.3390/app142411550.
15. Кривогузова А. С., Ткаченко С. Н., Шпилевой А. А. Влияние параметров обмоток и источника питания на пусковые характеристики модернизированного бесщеточного двигателя постоянного тока // Russian Technological Journal. 2025. Т. 13, № 4. С. 69–77. http://doi.org/10.32362/2500-316X-2025-13-4-69-77.
16. Raeisi Hasanhendoei G. H., Afjei E., Naseri M. et al. Automatic and real time phase advancing in BLDC motor by employing an electronic governor for a desired speed-torque/angle profile // e-Prime – Advances in Electrical Engineering, Electronics and Energy. 2023. Vol. 4. https://doi.org/10.1016/j.prime.2023.100111.
17. Stamova I., Stamov G. Integral manifolds for impulsive differential problems with applications. Academic Press, 2025. 348 p.
18. Abdulkareem H., Alsaif O. I., Younis L. et al. Performance optimization of BLDC motor control using sand cat swarm algorithm and linear quadratic regulator // Journal of Robotics and Control (JRC). 2025. Vol. 6, no 1. P. 306–314. https://doi.org/10.18196/jrc.v6i1.24958.
19. Akram S., Aljanabi M. A comprehensive investigation of brushless direct current (BLDC) motors: Current state, advanced control strategies, and utilization systems // Salud, Ciencia y Tecnología – Serie de Conferencias. 2024. Vol. 3. P. 865. https://doi.org/10.56294/sctconf2024865.
20. Dakheel H. S., Abdullah Z. B., Shneen S. W. Advanced optimal GA-PID controller for BLDC motor // Bulletin of Electrical Engineering and Informatics (BEEI). 2023. Vol. 12, no. 4. P. 2077–2086. https://doi.org/10.11591/eei.v12i4.4649.
21. Gujja M. M., Ishak D., Hamidi M. N. et al. Performance comparison and analysis of four- and six-switch inverter controls of BLDC motor employing deep learning // Jurnal Kejuruteraan. 2024. Vol. 36, no. 4. P. 1409–1422. https://doi.org/10.17576/jkukm-2024-36(4)-07.
Review
For citations:
Tkachenko S.N., Krivoguzova A.S., Shpilevoi A.A. Mathematical modeling of modernized brushless direct current motor working at maximum speed. Proceedings in Cybernetics. 2025;24(4):80-92. (In Russ.) https://doi.org/10.35266/1999-7604-2025-4-9
Views:
167
JATS XML
Email this article 